This year at MOA the driving force for SRC are MP5 replicas powered by CO2. A few years ago, the SRC was the first to launch MP5 electric replica with stamped steel receivers. From the outside, the replicas were very made, the internal mechanical parts were much worse. After a short time they disappeared from the market - today it is hard to find even a second hand replica for sale.
Nearly two months ago, steel MP5 from SRCs have returned. This time, powered by 12 g CO2 capsules. The first one to appear is the MP5A2 (SR5-A2)
And it is already presented in five variants that differ only in the butt stock used. More specifically: there are four different butt stocks, the fifth replica has non.
SR5-A2
SR5-A3
SR5-AF
SR5-AU
and SR5-AS
All are equipped with a plastic pistol grip intended for right-handed shooters with a one-sided safety / fire selector switch, often called the "early type" and wide polymer front grip. In addition to part made, for obvious reasons, from plastic, all replicas are referred to as "full steel".
Total length and weight:
A2 - 700 mm and 2755 g;
A3 - 590 -730 mm and 2935 g;
AF - 500-730 mm and 3200 g;
AU - 500-700 mm and 2855 g;
AS - 470 mm and 2380 g.
Muzzle velocity (0.2 g): 395 - 470 fps (catalog data, no information was given regarding such a spread).
The design of the magazine is interesting. The CO2 capsule is obviously inside, but to insert it, it is necessary to remove outer shell of the magazine.
The designers wanted to faithfully recreate the magazine of the real firearm - thanks to this they avoided placing a knob at the bottom of the magazine used to tighten the capsule.
More versions of the SR5 will be available soon - the suppressed SD version
and the shortes one - K (from the German word kurz - short)
One should expect versions with different butt stocks.
The second SRC feature of this year are the TITAN revolvers that are produced as SRC's own design, also powered by CO2. The revolvers are available in three sizes, each version in black and silver (platinum according to SRC).
Titan 6"
Titan 4"
Titan 2,5"
Total length, weight and muzzle velocity:
6 "- 295 mm, 995 g, 476 - 493 fps (catalog data - no information about the reason of the spread);
4 "- 250 mm, 755 g, 427-460 fps;
2.5 "- 210 mm, 720 g, 395-427 fps.
They are power supply 12 g CO2 capsules placed in the handle. The grip must be pulled back while the capsule is inserted.
The BBs are loaded individually into dummy revolver rounds. In the standard version, "rounds" have rubber tips. There is also a fully metal version - it increases the weight of the loaded revolver, it can affect the revolving movement of the drum and apparently gives an additional 30 to 60 fps.
