To meet the expectation of its clients, Specna Arms had presented its new CORE™ line - a exceptional series of replicas that introduces a new quality into the market. Affordable price together with the quick spring exchange system and high quality materials make this series attractive for both beginners and seasoned airsofters alike.
.jpg "Specna Arms CORET replicas (1).jpg")
.jpg "Specna Arms CORET replicas (2).jpg")
.jpg "Specna Arms CORET replicas (3).jpg")
.jpg "Specna Arms CORET replicas (4).jpg")
.jpg "Specna Arms CORET replicas (5).jpg")
.jpg "Specna Arms CORET replicas (6).jpg")
.jpg "Specna Arms CORET replicas (8).jpg")
For those of you who did not see the live stream on the Gunfire channel and the video promoting the core CORE™ line we would like to present its pros yet again:
A new Gearbox, which can work even with an M140 spring. Stock muzzle velocity of about 380 FPS. The set some with an additional M90 spring, which reduces the FPS to about 310.
The Gearbox has 8mm bearings and properly shimmed steel gears. The piston has full steel teeth. It also has type 1 cylinder and a steel cut off lever. Also, take notice at the rotary hop-up chamber.
.jpg "Specna Arms CORET - internal parts after 16 hi-caps (2).jpg")
.jpg "Specna Arms CORET - internal parts after 16 hi-caps (3).jpg")
.jpg "Specna Arms CORET - internal parts after 16 hi-caps (4).jpg")
The Core System spring exchange system, which allows for exchanging the spring in 45s. The only tools needed are a longer Philips screwdriver and a Allen wrench.
The Ncore receiver is made out of a mix of nylon and composites.
Right after receiving the replica, Gunfire.pl made a live stream which you can see here:
Yesterday, a promotional video was published on Youtube:
Source:
Gunfire.pl
