Holosun AEMS is available
The sight is characterized by a compact, angular design and integrated transparent covers of the glass lenses of the collimator (replaceable in case of damage). They are supposed not to disturb the visibility through the collimator and allow for quick opening in case of getting dirty.
The sight's lens is 22 mm high and 28 mm wide, so it offers a large field of view. The set includes a mount that places the sight at the 1/3 co-witness height, i.e. standard iron sights mounted on the same rail should be visible in the lower 1/3 part of the lens.
The reticles available are a 2 MOA dot with a 65 MOA circle, just the dot, or just the circle. AEMS can be purchased with a green or a red reticle. The power supply is provided by a single CR2032 battery, which offers 20,000 hours of continuous operation at the 6th level of brightness, using a dot with a circle, or 50,000 hours when only using the dot. These numbers do not take into account additional functions such as automatic adjustment of the brightness level to the environment, or the Shake-Awake system that disables the collimator after a set time and enabling it when a slightest movement is detected. AEMS offers 12 brightness settings, 8 of which are for daytime use and 4 for night vision.
The solar panel placed on the top of the housing supports the battery, it also functions as a light sensor and can also be used as an independent source of energy in an event of the battery exhaustion or damage.
The +/- control buttons are located on the left side of the housing and the knobs adjusting the position of the reticle are on both sides of the housing. One *click is a 0.5 MOA change and the adjustment range is 50 MOA. The whole weighs 110 grams and measures 56 x 39 x 43 mm, not including the mount. The housing is made of 7075 T6 aluminum. The operating temperature range is -20 to +60 degrees Celsius. AEMS meets the IPX8 waterproof standard and G-forces up to 1000 (thousand) G.
The set includes a tool for adjustment and other maintenance procedures, a lens cloth, manual, 1/3 assembly and the collimator itself. The manufacturer's suggested price is around $ 500, which is around 423 EUR.